PEEK

威格斯VICTREX PEEK塑料详细说明

发布时间：2025-05-26作者：小编

Victrex PEEK材料介绍

一、材料分类与型号推荐

按增强方式、功能及工艺适配分类：

分类	代表型号	关键参数	适用工艺	典型应用场景
纯树脂	PEEK 450G	熔融指数: 45 g/10min，抗拉强度: 100 MPa	精密注塑、挤出	微型连接器、薄壁管材
玻璃纤维增强	PEEK 450GL30	30%玻纤，弯曲模量: 10 GPa	高温注塑、模压	汽车结构支架、无人机框架
碳纤维增强	PEEK 150CA30	30%碳纤，导电性: 10²-10³ Ω·cm	高温压制、机加工	半导体夹具、EMI屏蔽部件
耐磨改性	PEEK FC 30	摩擦系数: 0.12，PV极限: 1.2 MPa·m/s	注塑（防腐蚀螺杆）	无润滑轴承、真空导轨
医用级	PEEK OPTIMA® LT1	弹性模量: 4 GPa，X射线可透性	CNC加工、3D打印	骨科植入物、手术器械
薄膜与线材	APTIV™ 1100薄膜	厚度: 12-250μm，介电强度: 150 kV/mm	热压成型、层压	高频电路基材、柔性电子绝缘
3D打印专用	VICTREX™ AM 200线材	打印温度: 390-420°C，层厚: 0.1-0.3mm	FDM 3D打印	耐高温夹具、定制化支架

二、核心特性与量化对比

1. 高温性能

长期使用温度：260°C（短期300°C），UL94 V-0阻燃。
热变形温度（HDT）：纯树脂160°C（1.8MPa），玻纤增强315°C。

2. 机械性能

性能	PEEK 450G	PEEK 450GL30	铝合金6061-T6
抗拉强度 (MPa)	100	170	300-500
弯曲模量 (GPa)	3.6	10	69
缺口冲击 (kJ/m²)	8	10	20-30

3. 化学稳定性

耐受介质：液压油（Skydrol 500B）、浓硫酸（20°C）、海水。
受限介质：浓硝酸（>50%）、熔融碱金属（需HT™改性）。

4. 摩擦性能

材料	摩擦系数（干态 vs.钢）	PV极限 (MPa·m/s)
PEEK 450G	0.35	0.5
PEEK FC 30	0.12	1.2
聚酰亚胺（PI）	0.25	0.3

三、应用领域与效益分析

1. 航空航天

部件：发动机密封环、轴承保持架。
效益：减重50%，耐航空燃油，通过FAA/EASA认证。

2. 医疗设备

应用：脊柱融合器（PEEK OPTIMA® LT1）。
优势：X射线可透性，弹性模量匹配骨骼，降低应力屏蔽。

3. 电子电气

应用：5G基站高频连接器（APTIV™薄膜）。
优势：介电损耗0.001@10GHz，耐回流焊（260°C）。

4. 能源工业

应用：深海阀门阀座（PEEK 150CA30）。
效益：耐H₂S腐蚀寿命从6个月→5年，维护成本降低70%。

四、选型决策树（关键路径）

1. 法规与领域筛选

医疗植入 → PEEK OPTIMA® LT1/MT
食品接触 → FDA/EU 10/2011认证型号

2. 环境条件筛选

温度>240°C → 增强型号（450GL30/150CA30）
化学暴露 → 耐强酸HT™或标准型号

3. 功能需求筛选

耐磨 → PEEK FC系列
导电 → 碳纤维增强（150CA30）

4. 加工与成本优化

精密注塑 → 高流动性450G
成本敏感 → 混合方案（PEEK+PPS）

五、特殊场景解决方案

场景	挑战	推荐型号	性能验证
核辐射环境	γ射线脆化	PEEK 450G	耐受>1000 kGy，ASTM E1026测试
超高压（>1000bar）	蠕变变形	PEEK 150CA30	抗蠕变<0.5%@100MPa，NORSOK M-710认证
深冷（-253°C）	低温脆裂	PEEK LTT™	夏比冲击>25 kJ/m²@-196°C，NASA认证
高频电气（>28GHz）	介电损耗	APTIV™ 1100薄膜	介电常数3.0±0.1，损耗因子0.001@10GHz
生物附着（海洋）	藻类/藤壶污染	PEEK OPTIMA®+表面改性	附着率↓90%，ASTM D5618测试

六、加工工艺指南

1. 注塑成型

熔体温度：360-400°C
模具温度：≥160°C（减少内应力）
螺杆转速：≤100 rpm（防止降解）

2. 3D打印（FDM）

打印温度：390-420°C
热床温度：120-140°C
后处理：200°C退火2小时（结晶度↑至35%）

3. 机加工

刀具：硬质合金或金刚石涂层
切削速度：100-200 m/min（干切或冷却液辅助）

七、成本优化策略

混合材料设计：关键部位用PEEK，非承力区用PPS（成本↓30%）。
回收料利用：Regrind级材料（成本↓40%，性能保留>90%）。
设计简化：壁厚均匀化（良率↑至95%+）。

八、Victrex核心优势

全球产能：年产7000吨，稳定供应。
认证体系：FDA、ISO 13485、UL94 V-0等全认证覆盖。
技术支持：在线选型工具（Material Selector）、快速试样服务（72小时）。

九、Victrex PEEK所有型号规格

Victrex plc	Film, PEEK	APTIV™ FILMS 1000
Victrex plc	Film, PEEK	APTIV™ FILMS 1102
Victrex plc	Film, PEEK	APTIV™ FILMS 1103
Victrex plc	Film, PEEK	APTIV™ FILMS 1300
Victrex plc	Film, PEEK	APTIV™ FILMS 2000
Victrex plc	Film, PEEK	APTIV™ FILMS 2100
Victrex plc	Film, PEEK	APTIV™ FILMS XPI A105
Victrex plc	Film, PEEK	APTIV™ FILMS XPI A106
Victrex plc	Film, PEEK	APTIV™ FILMS XPI A107
Victrex plc	Film, PEEK	APTIV™ FILMS XPI A108
Victrex plc	Film, PEEK	APTIV™ FILMS XPI B105
Victrex plc	聚醚醚酮(PEEK)	VICOTE™ COATINGS 700 Series
Victrex plc	聚醚醚酮(PEEK)	VICOTE™ COATINGS 705Blk
Victrex plc	聚醚醚酮(PEEK)	VICOTE™ COATINGS F804
Victrex plc	聚醚醚酮(PEEK)	VICOTE™ COATINGS F804BLK
Victrex plc	聚醚醚酮(PEEK)	VICOTE™ COATINGS F805
Victrex plc	聚醚醚酮(PEEK)	VICOTE™ COATINGS F807BLK
Victrex plc	聚醚醚酮(PEEK)	VICOTE™ COATINGS F808
Victrex plc	聚醚醚酮(PEEK)	VICOTE™ COATINGS F809
Victrex plc	聚醚醚酮(PEEK)	VICOTE™ COATINGS F810BLK
Victrex plc	聚醚醚酮(PEEK)	VICOTE™ COATINGS F815
Victrex plc	聚醚醚酮(PEEK)	VICOTE™ COATINGS F817
Victrex plc	聚醚醚酮(PEEK)	VICOTE™ COATINGS Vicote Coatings 700 series
Victrex plc	聚醚醚酮(PEEK)	VICTREX AM™ 450 FIL
Victrex plc	聚醚醚酮(PEEK)	VICTREX CT™ POLYMER 100
Victrex plc	聚醚醚酮(PEEK)	VICTREX FG™ POLYMER 100/101
Victrex plc	聚醚醚酮(PEEK)	VICTREX FG™ POLYMER 120/121
Victrex plc	聚醚醚酮(PEEK)	VICTREX FG™ POLYMER 140
Victrex plc	聚醚醚酮(PEEK)	VICTREX FG™ POLYMER 200/201
Victrex plc	聚醚醚酮(PEEK)	VICTREX FG™ POLYMER 240
Victrex plc	聚醚醚酮(PEEK)	VICTREX FG™ POLYMER 340
Victrex plc	聚醚醚酮(PEEK)	VICTREX FG™ POLYMER 700 FPD
Victrex plc	聚醚醚酮(PEEK)	VICTREX HPG™ POLYMER 140 GRA
Victrex plc	聚醚醚酮(PEEK)	VICTREX HPG™ POLYMER 240 GRA
Victrex plc	聚醚醚酮(PEEK)	VICTREX XPI™ 150 Polymer
Victrex plc	聚醚醚酮(PEEK)	VICTREX XPI™ 174 Polymer
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 150CA30
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 150FC30
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 150FW30
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 150G
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 150G903 Black
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 150GL15
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 150GL20
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 150GL30
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 150GL30BLK
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 150P
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 150PF
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 150UF10
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 150XF
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 151G
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 380P
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 381G
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 450CA20
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 450CA30
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 450CA40
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 450FC30
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 450FE20
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 450G903 Black
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 450GL15
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 450GL20
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 450GL30
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 450GL30BLK
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 450G™
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 450P
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 450PF
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 650CA30
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 650G
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 650P
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 650PF
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 90CA30
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 90G
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 90GL30
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 90GL30BLK-EU
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 90GL60
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 90HMF20
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 90HMF40
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER 90P
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER ABV 300 GRA
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER AS110
Victrex plc	聚醚醚酮(PEEK)	VICTREX™ PEEK POLYMER ESD101

十、Victrex PEEK材料特性，应用概览表

1. 纯树脂系列（未增强）

型号	关键特性	典型应用	关键参数
PEEK 150G	基础级，良好流动性，耐化学腐蚀	管材、线缆护套、密封垫片	- 熔融指数: 23 g/10min (400°C/5kg) - 抗拉强度: 90 MPa - HDT (1.8MPa): 143°C
PEEK 450G	高流动性，适合薄壁件，UL94 V-0阻燃	精密齿轮、电子连接器、薄膜	- 熔融指数: 45 g/10min - 抗拉强度: 100 MPa - 连续使用温度: 260°C

2. 短纤维增强系列

型号	增强类型	关键特性	典型应用	关键参数
PEEK 450GL30	30%玻璃纤维	高刚性、低翘曲，尺寸稳定性优	汽车支架、无人机结构件	- 弯曲模量: 10 GPa - 抗拉强度: 170 MPa - HDT (1.8MPa): 315°C
PEEK 150CA30	30%碳纤维	导电性、抗静电，抗蠕变	半导体夹具、EMI屏蔽部件	- 表面电阻: 10²–10³ Ω·cm - 热导率: 0.9 W/m·K - 抗拉强度: 210 MPa

3. 功能改性系列

型号	改性类型	关键特性	典型应用	关键参数
PEEK FC 30	PTFE+石墨润滑	超低摩擦，自润滑	无油轴承、真空导轨	- 摩擦系数: 0.12 (vs.钢) - PV极限: 1.2 MPa·m/s - 磨损率: <1×10⁻⁶ mm³/N·m
PEEK ESD	抗静电填料	静电耗散，洁净室兼容	晶圆载具、硬盘组件	- 表面电阻: 10⁶–10⁹ Ω/sq - 抗拉强度: 110 MPa
PEEK HT™	耐高温氧化改性	耐受强氧化性介质	化工阀门、浓硝酸环境部件	- 耐硝酸浓度: >60% - 长期使用温度: 260°C

4. 医用级系列

型号	关键特性	典型应用	关键参数
PEEK OPTIMA® LT1	弹性模量匹配骨骼，X射线可透	脊柱融合器、颅骨修复板	- 弹性模量: 4 GPa - 抗拉强度: 90 MPa - 生物相容性: ISO 10993认证
PEEK OPTIMA® MT	半结晶度可调，高流动性	手术器械手柄、内窥镜组件	- 结晶度: 20–35% - 熔融指数: 50 g/10min

5. 薄膜与线材系列

型号	形态	关键特性	典型应用	关键参数
APTIV™ 1100	薄膜	超薄绝缘，高频稳定性	柔性电路基材、覆铜板	- 厚度: 12–250 μm - 介电常数: 3.2 @1MHz - 介电强度: 150 kV/mm
VICTREX™ AM 200	3D线材	耐高温FDM打印，低收缩	定制夹具、耐高温支架	- 直径: 1.75/2.85 mm - 打印温度: 390–420°C - 层厚: 0.1–0.3 mm

6. 长纤维增强系列

型号	增强类型	关键特性	典型应用	关键参数
PEEK LTT™ 45	长玻璃纤维	抗冲击，高韧性	防弹装甲、重载轴承座	- 纤维长度: >5 mm - 缺口冲击强度: 25 kJ/m² - 抗拉强度: 180 MPa

参数注解

HDT（热变形温度）: 标准测试条件为1.8MPa载荷。
摩擦系数: 干态下与钢对磨的测试值。
PV极限: 材料在干摩擦下的压力-速度乘积极限（单位：MPa·m/s）。

选型补充说明

定制型号：Victrex提供定制化改性服务（如颜色、导电率、耐辐射等），需提供具体工况需求。
认证信息：医用级OPTIMA系列通过FDA（美国）和CE（欧盟）植入物认证，其他工业型号符合RoHS/REACH。
全球标准：关键型号通过航空航天（AS9100）、汽车（IATF 16949）等供应链认证。

Victrex PEEK Material Standard Solution

I. Material Classification and Model Recommendation

Classification	Representative Model	Key Parameters	Applicable Process	Typical Application Scenarios
Pure Resin	PEEK 450G	Melt index: 45 g/10min, Tensile strength: 100 MPa	Precision injection molding, Extrusion	Miniature connectors, Thin-walled tubing
Glass Fiber Reinforced	PEEK 450GL30	30% glass fiber, Flexural modulus: 10 GPa	High-temperature injection molding, Compression molding	Automotive structural brackets, Drone frames
Carbon Fiber Reinforced	PEEK 150CA30	30% carbon fiber, Electrical conductivity: 10²-10³ Ω·cm	High-temperature pressing, Machining	Semiconductor fixtures, EMI shielding components
Wear-resistant Modified	PEEK FC 30	Friction coefficient: 0.12, PV limit: 1.2 MPa·m/s	Injection molding (corrosion-resistant screws)	Lubrication-free bearings, Vacuum rails
Medical Grade	PEEK OPTIMA® LT1	Elastic modulus: 4 GPa, X-ray transparency	CNC machining, 3D printing	Orthopedic implants, Surgical instruments
Film and Wire	APTIV™ 1100 film	Thickness: 12-250μm, Dielectric strength: 150 kV/mm	Thermal pressing, Lamination	High-frequency circuit substrates, Flexible electronic insulation
3D Printing Dedicated	VICTREX™ AM 200 wire	Printing temperature: 390-420°C, Layer thickness: 0.1-0.3mm	FDM 3D printing	High-temperature fixtures, Customized brackets

II. Core Properties and Quantitative Comparison

High-temperature Performance
- Long-term use temperature: 260°C (short-term 300°C), UL94 V-0 flame retardant.
- Heat deflection temperature (HDT): Pure resin 160°C (1.8MPa), Glass fiber reinforced 315°C.
Mechanical Properties

Property	PEEK 450G	PEEK 450GL30	Aluminum Alloy 6061-T6
Tensile strength (MPa)	100	170	300-500
Flexural modulus (GPa)	3.6	10	69
Notched impact (kJ/m²)	8	10	20-30

Chemical Stability
- Resistant media: Hydraulic oil (Skydrol 500B), Concentrated sulfuric acid (20°C), Seawater.
- Limited media: Concentrated nitric acid (>50%), Molten alkali metals (HT™ modification required).
Friction Performance

Material	Friction coefficient (dry vs. steel)	PV limit (MPa·m/s)
PEEK 450G	0.35	0.5
PEEK FC 30	0.12	1.2
Polyimide (PI)	0.25	0.3

III. Application Fields and Benefit Analysis

Aerospace
- Components: Engine sealing rings, Bearing cages.
- Benefits: Weight reduction of 50%, Resistant to aviation fuel, FAA/EASA certified.
Medical Equipment
- Application: Spinal fusion cage (PEEK OPTIMA® LT1).
- Advantages: X-ray transparency, Elastic modulus matching bone, Reduced stress shielding.
Electrical and Electronic
- Application: 5G base station high-frequency connectors (APTIV™ film).
- Advantages: Dielectric loss 0.001@10GHz, Resistant to reflow soldering (260°C).
Energy Industry
- Application: Deep-sea valve seat (PEEK 150CA30).
- Benefits: Service life extended from 6 months to 5 years, Maintenance cost reduced by 70%.

IV. Selection Decision Tree (Key Path)

Regulations and Field Screening
- Medical implants → PEEK OPTIMA® LT1/MT
- Food contact → FDA/EU 10/2011 certified models
Environmental Condition Screening
- Temperature > 240°C → Reinforced models (450GL30/150CA30)
- Chemical exposure → HT™ or standard models for acid resistance
Functional Requirement Screening
- Wear resistance → PEEK FC series
- Electrical conductivity → Carbon fiber reinforced (150CA30)
Processing and Cost Optimization
- Precision injection molding → High-flow 450G
- Cost-sensitive → Hybrid solution (PEEK+PPS)

V. Special Scenario Solutions

Scenario	Challenge	Recommended Model	Performance Verification
Nuclear radiation environment	γ-ray embrittlement	PEEK 450G	Withstands >1000 kGy, ASTM E1026 test
Ultra-high pressure (>1000bar)	Creep deformation	PEEK 150CA30	Creep resistance <0.5%@100MPa, NORSOK M-710 certification
Cryogenic (-253°C)	Low-temperature brittleness	PEEK LTT™	Charpy impact >25 kJ/m²@-196°C, NASA certification
High-frequency electrical (>28GHz)	Dielectric loss	APTIV™ 1100 film	Dielectric constant 3.0±0.1, Loss factor 0.001@10GHz
Biofouling (marine)	Algae/barnacle fouling	PEEK OPTIMA®+ surface modification	Fouling rate ↓90%, ASTM D5618 test

VI. Processing Technology Guide

Injection Molding
- Melt temperature: 360-400°C
- Mold temperature: ≥160°C (reduce internal stress)
- Screw speed: ≤100 rpm (prevent degradation)
3D Printing (FDM)
- Printing temperature: 390-420°C
- Heat bed temperature: 120-140°C
- Post-processing: Annealing at 200°C for 2 hours (increase crystallinity to 35%)
Machining
- Tools: Carbide or diamond-coated
- Cutting speed: 100-200 m/min (dry cutting or with coolant)

VII. Cost Optimization Strategy

Hybrid material design: Use PEEK in critical areas, PPS in non-load-bearing areas (cost ↓30%).
Recycled material utilization: Regrind grade material (cost ↓40%, performance retention >90%).
Design simplification: Uniform wall thickness (yield ↑ to 95%+).

VIII. Victrex Core Advantages

Global production capacity: Annual output of 7000 tons, stable supply.
Certification system: Full certification coverage including FDA, ISO 13485, UL94 V-0.
Technical support: Online material selection tool (Material Selector), Rapid prototyping service (within 72 hours).

IX. All Models and Specifications of Victrex PEEK

Victrex plc	Film, PEEK	APTIV™ FILMS 1000
Victrex plc	Film, PEEK	APTIV™ FILMS 1102
Victrex plc	Film, PEEK	APTIV™ FILMS 1103
Victrex plc	Film, PEEK	APTIV™ FILMS 1300
Victrex plc	Film, PEEK	APTIV™ FILMS 2000
Victrex plc	Film, PEEK	APTIV™ FILMS 2100
Victrex plc	Film, PEEK	APTIV™ FILMS XPI A105
Victrex plc	Film, PEEK	APTIV™ FILMS XPI A106
Victrex plc	Film, PEEK	APTIV™ FILMS XPI A107
Victrex plc	Film, PEEK	APTIV™ FILMS XPI A108
Victrex plc	Film, PEEK	APTIV™ FILMS XPI B105
Victrex plc	PEEK	VICOTE™ COATINGS 700 Series
Victrex plc	PEEK	VICOTE™ COATINGS 705Blk
Victrex plc	PEEK	VICOTE™ COATINGS F804
Victrex plc	PEEK	VICOTE™ COATINGS F804BLK
Victrex plc	PEEK	VICOTE™ COATINGS F805
Victrex plc	PEEK	VICOTE™ COATINGS F807BLK
Victrex plc	PEEK	VICOTE™ COATINGS F808
Victrex plc	PEEK	VICOTE™ COATINGS F809
Victrex plc	PEEK	VICOTE™ COATINGS F810BLK
Victrex plc	PEEK	VICOTE™ COATINGS F815
Victrex plc	PEEK	VICOTE™ COATINGS F817
Victrex plc	PEEK	VICOTE™ COATINGS Vicote Coatings 700 series
Victrex plc	PEEK	VICTREX AM™ 450 FIL
Victrex plc	PEEK	VICTREX CT™ POLYMER 100
Victrex plc	PEEK	VICTREX FG™ POLYMER 100/101
Victrex plc	PEEK	VICTREX FG™ POLYMER 120/121
Victrex plc	PEEK	VICTREX FG™ POLYMER 140
Victrex plc	PEEK	VICTREX FG™ POLYMER 200/201
Victrex plc	PEEK	VICTREX FG™ POLYMER 240
Victrex plc	PEEK	VICTREX FG™ POLYMER 340
Victrex plc	PEEK	VICTREX FG™ POLYMER 700 FPD
Victrex plc	PEEK	VICTREX HPG™ POLYMER 140 GRA
Victrex plc	PEEK	VICTREX HPG™ POLYMER 240 GRA
Victrex plc	PEEK	VICTREX XPI™ 150 Polymer
Victrex plc	PEEK	VICTREX XPI™ 174 Polymer
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 150CA30
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 150FC30
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 150FW30
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 150G
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 150G903 Black
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 150GL15
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 150GL20
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 150GL30
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 150GL30BLK
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 150P
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 150PF
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 150UF10
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 150XF
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 151G
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 380P
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 381G
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 450CA20
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 450CA30
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 450CA40
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 450FC30
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 450FE20
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 450G903 Black
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 450GL15
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 450GL20
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 450GL30
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 450GL30BLK
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 450G™
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 450P
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 450PF
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 650CA30
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 650G
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 650P
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 650PF
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 90CA30
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 90G
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 90GL30
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 90GL30BLK-EU
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 90GL60
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 90HMF20
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 90HMF40
Victrex plc	PEEK	VICTREX™ PEEK POLYMER 90P
Victrex plc	PEEK	VICTREX™ PEEK POLYMER ABV 300 GRA
Victrex plc	PEEK	VICTREX™ PEEK POLYMER AS110
Victrex plc	PEEK	VICTREX™ PEEK POLYMER ESD101

X、Victrex PEEK Material Models Overview Table

1. Virgin Resin Series (Unfilled)

Model	Key Characteristics	Typical Applications	Key Parameters
PEEK 150G	Base grade with good flowability, chemical resistance	Tubing, cable sheaths, gaskets	- Melt Flow Index: 23 g/10min (400°C/5kg) - Tensile Strength: 90 MPa - HDT (1.8MPa): 143°C
PEEK 450G	High flowability for thin-walled parts, UL94 V-0 flame retardant	Precision gears, connectors, films	- Melt Flow Index: 45 g/10min - Tensile Strength: 100 MPa - Continuous Use Temp: 260°C

2. Short Fiber-Reinforced Series

Model	Reinforcement	Key Characteristics	Typical Applications	Key Parameters
PEEK 450GL30	30% Glass Fiber	High stiffness, low warpage, dimensional stability	Automotive brackets, drone frames	- Flexural Modulus: 10 GPa - Tensile Strength: 170 MPa - HDT (1.8MPa): 315°C
PEEK 150CA30	30% Carbon Fiber	Conductivity, anti-static, creep resistance	Semiconductor fixtures, EMI shields	- Surface Resistivity: 10²–10³ Ω·cm - Thermal Conductivity: 0.9 W/m·K - Tensile Strength: 210 MPa

3. Functional Modified Series

Model	Modification	Key Characteristics	Typical Applications	Key Parameters
PEEK FC 30	PTFE + Graphite	Ultra-low friction, self-lubricating	Dry bearings, vacuum rails	- Friction Coefficient: 0.12 (vs. steel) - PV Limit: 1.2 MPa·m/s - Wear Rate: <1×10⁻⁶ mm³/N·m
PEEK ESD	Anti-static additives	ESD protection, cleanroom compatibility	Wafer carriers, HDD components	- Surface Resistivity: 10⁶–10⁹ Ω/sq - Tensile Strength: 110 MPa
PEEK HT™	High-temperature oxidation resistance	Resists strong oxidizers	Chemical valves, HNO₃ environments	- HNO₃ Resistance: >60% - Continuous Use Temp: 260°C

4. Medical Grade Series

Model	Key Characteristics	Typical Applications	Key Parameters
PEEK OPTIMA® LT1	Bone-like modulus, X-ray transparency	Spinal cages, cranial implants	- Elastic Modulus: 4 GPa - Tensile Strength: 90 MPa - Biocompatibility: ISO 10993 Certified
PEEK OPTIMA® MT	Adjustable crystallinity, high flowability	Surgical tools, endoscope components	- Crystallinity: 20–35% - Melt Flow Index: 50 g/10min

5. Films and Filaments Series

Model	Form	Key Characteristics	Typical Applications	Key Parameters
APTIV™ 1100	Film	Ultra-thin insulation, high-frequency stability	Flexible circuits, PCBs	- Thickness: 12–250 μm - Dielectric Constant: 3.2 @1MHz - Dielectric Strength: 150 kV/mm
VICTREX™ AM 200	3D Filament	High-temp FDM printing, low shrinkage	Custom jigs, high-temp fixtures	- Diameter: 1.75/2.85 mm - Printing Temp: 390–420°C - Layer Thickness: 0.1–0.3 mm

6. Long Fiber-Reinforced Series

Model	Reinforcement	Key Characteristics	Typical Applications	Key Parameters
PEEK LTT™ 45	Long Glass Fiber	High impact resistance, toughness	Ballistic armor, heavy-duty bearings	- Fiber Length: >5 mm - Notched Impact Strength: 25 kJ/m² - Tensile Strength: 180 MPa

Parameter Notes

HDT (Heat Deflection Temperature): Measured at 1.8MPa load.
Friction Coefficient: Dry sliding against steel.
PV Limit: Pressure-velocity limit under dry friction (unit: MPa·m/s).

Selection Guidelines

Custom Grades: Victrex offers tailored modifications (color, conductivity, radiation resistance) based on application requirements.
Certifications: Medical grades (OPTIMA®) comply with FDA and CE implant standards; industrial grades meet RoHS/REACH.
Global Standards: Key models are certified for aerospace (AS9100) and automotive (IATF 16949) supply chains.

For full datasheets (density, shrinkage, CTE, etc.), visit the Victrex website or request the 《Victrex PEEK Material Databook》 from technical support.